Publish data from your ESP8266 to thingspeak.com

On this posts ( post#1, post#2) I've presented how to create a channel, fields, API KEYS on thingspeak.com

Now will publish some data from ESP8266 to thingspeak.com. Can be any kind of data, from
temperature, humidity, voltage you name it. As long as it has a value, can be published.

Add following  lines after the include statements. (Can use the blinky code as skeleton).

#include "espconn.h" 
LOCAL struct espconn *pCon = NULL;
LOCAL my_count = 0;
LOCAL your_value = 33;




Add the following code in the user_init() function.

const char ssid[32] = "my_home_ssid";
const char password[32] = "my_home_password";

struct station_config stationConf;

wifi_set_opmode( STATION_MODE );
os_memcpy(&stationConf.ssid, ssid, 32);
os_memcpy(&stationConf.password, password, 32);
wifi_station_set_config(&stationConf); 
wifi_station_connect();
//connect to the previous pCon created structure
int ret = 0;
ret = espconn_connect(pCon);

if(ret == 0) 
      INFO("espconn_connect OK!\r\n");
else
{
      //INFO("espconn_connect FAILED!\r\n");  
      char *fail;
      os_sprintf(fail, "%d \r\n", ret);
      //INFO(fail);
      //clean up allocated memory
      if(pCon->proto.tcp)
          os_free(pCon->proto.tcp);
      os_free(pCon);
      pCon = NULL;
} 

Add this code in a timer function like in this example:

pCon = (struct espconn *)os_zalloc(sizeof(struct espconn));

if (pCon == NULL)

{

        os_printf("pCon ALLOCATION FAIL\r\n");

        return;

}

pCon->type = ESPCONN_TCP;

pCon->state = ESPCONN_NONE;

    

pCon->proto.tcp = (esp_tcp *)os_zalloc(sizeof(esp_tcp));

pCon->proto.tcp->local_port = espconn_port();

//set up the server remote port

pCon->proto.tcp->remote_port = 80;

//set up the remote IP

uint32_t ip = ipaddr_addr("184.106.153.149"); //IP address for thingspeak.com

os_memcpy(pCon->proto.tcp->remote_ip, &ip, 4);

//set up the local IP

struct ip_info ipconfig;

wifi_get_ip_info(STATION_IF, &ipconfig);

os_memcpy(pCon->proto.tcp->local_ip, &ipconfig.ip, 4);

//register publish_thingspeak_connect_cb that will be called when the

//connection with the thingspeak is done. In this call back function

// will actualy do the data sending

espconn_regist_connectcb(pCon, publish_thingspeak_connect_cb);

where the callback function is:

static void ICACHE_FLASH_ATTR publish_thingspeak_connect_cb(void *arg)

{

  //INFO("========>publish_thingspeak_connect_cb\r\n");

  my_count++;

  struct espconn *pespconn = (struct espconn *)arg;

  char payload[128];

  char field1[10];

  char field2[10];

  os_sprintf(field1, "%d", your_value);

  os_sprintf(field2, "%d", my_count);

  os_sprintf(payload, "GET /update?  api_key=YOUR_THINGSPEAK_API_KEY&field1=%s&field2=%s\r\n", field1, field2);

  espconn_sent(pespconn, payload, strlen(payload));

  

}

and need to be added before the user_main function.

Change my_count and your_value with your data. 

Notes:

1. The time between to posts on thingspeak.com must be greater then 15 seconds.

2. Up to 8 fields can be used to post data on thingspeak.com